Planning a new patio, walkway, or driveway? Our Paver Calculator helps you determine exactly how many pavers you need based on the project area and paver dimensions. It also estimates the amount of bedding sand required for a solid foundation.
Privacy Protected
Paver Calculator
Estimate pavers and sand for patios & walkways
Project Dimensions
Estimated Materials
Enter dimensions to estimate pavers
Calculate Pavers for Patios & Walkways
Estimate the number of pavers and bedding sand needed for your project. Supports custom paver sizes and waste factors.
1
Measure Area
Enter the total length and width of the patio or walkway.
2
Paver Size
Input the dimensions of your chosen pavers (e.g., 4x8 inches).
3
Select Waste
Choose a waste factor (usually 5-10% for cuts and breakage).
Key Features
Paver Count
Calculate total pavers needed with waste factor included.
Sand Estimate
Get cubic yards and tons of bedding sand required.
Custom Sizes
Input any paver length and width for accurate results.
Frequently Asked Questions
A typical patio requires 4-6 inches of crushed stone base, while a driveway needs 8-12 inches.
Use coarse concrete sand for the bedding layer (1 inch thick) and polymeric sand for the joints.
Multiply the length by the width of the area in feet. For example, a 10x10 patio is 100 square feet.
Related Tools
View allBrick Calculator
Estimate bricks and mortar for walls.
Sand Calculator
Estimate sand for pavers & masonry.
Concrete Calculator
Calculate volume and bags for slabs & footings.
Drywall Calculator
Count sheets, screws, and compound needed.
Stair Calculator
Calculate rise, run, and stringer length.
Decking Calculator
Estimate deck boards and screws.
Last updated on